By: Ruhann
Thanks for the update. This should always work once an iDevice is jail broken regardless of the method used. Keep well.
View ArticleBy: quazy
The link to flex cable doesn’t work. And I can’t find one threw google. Does anyone know where I could get one?
View ArticleBy: Ruhann
OK I contacted bestcelldist.com and they said the last couple month have been slow on the product, but if there is renewed interest in at least 5 cables they will stock it again. So if you are...
View ArticleBy: Console to Cisco devices from your iPad « Routing-Bits
[...] So the reason for this post, It is aimed more to those of you that read the earlier post : “console-to-routers-using-the-ipad” and though of getting the FlexSerial cable at some [...]
View ArticleBy: serjio
As far as I got, iPad (as well as other i devices) has a serial port on pins 11 (ground), 12 (tx) and 13 (rx). Does this mean I can check if the port is working simply by running a minicom on tty.iap...
View ArticleBy: sunsrvc
You will also need a 470 kΩ resistor. This is used to bridge pin 1 and 21 and activates the UART/Serial access. Took some time to find this info. Google “Stefan Esser IOS Explotation”. That is where I...
View ArticleBy: sunsrvc
I have been doing more research. As it turns out the 470 kΩ resistor that is used to bridge pin 1 and 21 is for serial output from the iPhone. This is used to help find kernel exploits. I found a nice...
View ArticleBy: serjio
okay. I didn’t have any resistors, but I managed to test it via minicom. Just shorten those pins and start typing – you’ll see the echo. Once you open the circuit you won’t see the echo. What I am...
View ArticleBy: serjio
i believe this redpark cable is sheer waste of money, provided that your device is jailbroken. All you have to do is to convert levels. btw, recently I accidentally exposed my ipod’s serial to 5v for...
View ArticleBy: Get-Console Review on the iPad « Routing-Bits
[...] cable on my jailbroken iPad and iPhone, with the iSSH app and a ported version of Minicom (earlier blog post). Amidst some minor bugs and irritations this worked well and was considerably more...
View ArticleBy: Ruhann
I have the flex serial with the old 30-pin connector. I doubt you will get the flex serial cable with the new lighting protector. But you should be able to use the converter.
View ArticleBy: google api maps
Hmm is anyone else having problems with the pictures on this blog loading? I’m trying to determine if its a problem on my end or if it’s the blog. Any feedback would be greatly appreciated.
View Article
